It should also be full of water and free of floating debris.

Find a bucket that matches the level of your pool and set it on a step into the water. Over 24 hours, if the pool water is lower than the bucket’s mark then it is likely that you have a leak.

Bucket Test

The bucket test is a quick and easy method for determining if a drop in your pool water is 75035 due to normal evaporation or a leak. Simply place a bucket on the second step of your pool and fill it to match the level in your pool. Let the bucket sit for 24 hours and then check its water level.If the water in your pool has dropped more than find leak in pool the water level in your bucket, you probably have a leak.

To get accurate results, you should conduct the test on a clear day, as rain will skew your results. It is also important to keep in mind that not every pool leak can be detected by the bucket test alone, but it will give you a starting point for your search. If you do have a leak, a Teddy Bear Service professional will be able to pinpoint its location using the following tests.

Dye Test

When a pool company is called to fix a leak it is important that they have a good chance of finding the source of the leak as soon as possible. This way you can minimize the amount of time that a professional is working on your swimming pool, which saves you money on labor costs.

Using a dye test will help pinpoint the area where a leak is located. This is an easy test to perform at home, and can be done with food coloring or non toxic pool leak detection dye that is sold in most pool supply stores.

With the pump and water features turned off, squirt a little leak detection dye close to where you suspect there is a leak. If there is a crack or fissure causing the leak, you should see the dye move in the direction of the leak. If you see this, it is best to mark the spot with waterproof tape so that you can remember the location for patching.

Visual Inspection

One of the first steps in fixing swimming pool leaks is a thorough visual inspection. Pool experts carefully look at the interior and exterior of a pool as well as areas around pumps and other equipment to pinpoint possible weak points.

Once the pool is inspected visually, it’s time to test for leaks using food coloring or specialized dye. To do this, the pool is turned off and the suction side of the pool’s plumbing and anything under pressure that moves water to and from the pool are isolated.

Food color or dye is added to the water and a few drops are placed around the area where leaks are suspected. If the water level begins to drop, that area is likely the source of the leak.

Acoustic Inspection

Leaks in a swimming pool can cause costly water loss, increase utility bills and damage surrounding property.A regular inspection can help identify a leak early on and reduce the need 4900 W. Eldorado Pkwy, Suite 148 for excessive excavation and repairs.

Excessive water loss from your swimming pool is a sure sign of a leak.You may also notice a change in your pool’s water chemistry including a decrease in pH, salt levels and McKinney cyanuric acid as well (214)-213-4637 as increased phosphate and calcium hardness levels.

The acoustic inspection uses sound waves to locate the source of a leak, saving time and money for both clients and technicians. In a series of process of elimination style tests, the technician listens to each run of plumbing while watching a pressure gauge to pinpoint leak locations. The ability to locate the source of a leak saves time, resources and allows technicians to complete more accurate repair work faster. Leaks found in the skimmer, main drain, return lines or around your pool light can all be located with exceptional accuracy using Leaktronics equipment